Body
Body Mahogany
Adhesive Franklin Titebond 50
Body
Neck
Species Maple
Profile .800" / .875" '60s
Truss Rod Standard
Joint Angle 5° (+/- 15 seconds)
Adhesive Franklin Titebond 50
Neck
Neck Fit
Joint Mortise & Tenon
Adhesive Franklin Titebond 50
Joint Angle Tolerance +/- .005"
Neck Fit
Fingerboard
Species Rosewood
Frets Cryogenically Tempered, 24
Radius 12"
Nut/E.O.B 1.695/2.275
Inlays Acrylic Dot with 120th Banner
Fingerboard
Nut
Material White TekToid™
Width 1.695
Slots Gibson PLEK System
Nut
Headstock
Logo Gold Silkscreen "Gibson" & Holly
Truss Rod Cover Black Bell HS White "Special"

Headstock
Tuners
Model Vintage w/ Perloid Buttons
Tuning Ratio 14:01
Plating Nickel

Tuners
Bridge
Type Tune-O-Matic
Plating Chrome
Bridge
Tailpiece
Type Stop Bar
Plating Chrome
Tailpiece
Hardware
Knobs Supreme Grip Black Speed
Control Plate Black
Trim Rings Dark Cream
Strings .009 - .046, Genuine Gibson strings
Strap Buttons Aluminum
Hardware
Pickups
Neck Position 490R (Alnico #2)
Neck Position 490T (Alnico #2)
Pickups
Electronics
Potentiometers 2 Push/Pull Volume Controls,
2 Tone Controls
Type 500K Non-Linear
Toggle Switch Three-way Toggle with Black Plastic Tip
Output Jack 1/4" Mono
Electronics
Finishes
Butterscotch (Vintage Gloss) Heritage Cherry (Vintage Gloss) Desert Burst (Vintage Gloss) Ebony (Vintage Gloss) Fireburst (Vintage Gloss) Walnut (Vintage Gloss)
Sealer Nitrocellulose
Process 1-1.5 mils
Case
Type Gigbag
Case
Accessories
Additional Materials Each SG Special comes with a truss rod wrench, adjustment literature, and documentation for the guitar’s Limited Lifetime Warranty, along with Gibson’s 24/7/365 Customer Service.