USA: 1-800-4GIBSON
Europe: 00+8004GIBSON1
GibsonProductsStoreNews-LifestyleLessonsCommunity24/7 Support
  • Shown in Fireburst
  • Shown in Fireburst
  • Shown in Fireburst
  • Shown in Fireburst
  • Shown in Fireburst
  • Shown in Fireburst
  • Shown in Honeyburst
  • Shown in Honeyburst
  • Shown in Honeyburst
  • Shown in Honeyburst
  • Shown in Trans Amber
  • Shown in Trans Amber
  • Shown in Trans Amber
  • Shown in Trans Amber
  • Shown in Trans Black
  • Shown in Trans Black
  • Shown in Trans Black
  • Shown in Trans Black
Body
Top AAA Flamed Maple Veneer
Back Mahogany
Binding Cream and Black on Top
Adhesive Franklin Titebond 50
Body
Neck
Species Mahogany
Profile SlimTaper™; D-shaped
Truss Rod Traditional Adjustable
Adhesive Franklin Titebond 50
Neck
Neck Fit
Joint Mortise and Tenon
Joint Angle Tolerance +/- .015"
Adhesive Franklin Titebond 50
Neck Fit
Fingerboard
Species Rosewood
Frets 22
Radius 12"
Scale Length 25.5"
Binding Cream Binding
Inlays Mother-of-Pearl "Crown" Inlays
Fingerboard
Nut
Material Synthetic Bone Substitute
Width 1.68"
Nut
Headstock
Logo Epiphone
Inlay Flower Pot
Truss Rod Cover Black and White Antique Bell with engraved 'Nighthawk Custom Reissue"

Headstock
Tuners
Model Grover™ Tuners
Plating Nickel
Tuning Ratio 14:1

Tuners
Bridge/Tailpiece
Type Nighthawk fully-adjustable; String-Thru body
Plating Nickel
Bridge
Hardware
Knobs Gold Top Hat Knobs
Strap Buttons Die-cast Steel and Nickel Plated.
Strings .010 - .046, Swedish steel "hex" core
Hardware
Pickups
Neck Position NHR™ Mini-Humbucker; 4-wire
Middle Position NSX™ Single-Coil
Bridge Position Slant NHT™ Humbucker; 4-wire
Magnet Material Alnico II
Pickups
Electronics
Potentiometers One Volume, One Push/Pull Coil-tapping Tone Knob
Coil Wiring Hand-soldered and Machine Wound
Toggle Switch 5-way Slider
Output Jack Traditional 1/4"
Electronics
Finish
Sealer Polyurethane
Fireburst Honeyburst Trans Amber Trans Black
Case
Type Optional Hardshell
Case Exterior Black Tolex
Case Interior Black Tolex
Case
Accessories
Additional Materials Includes an owner's manual with warranty information, Epiphone poster, Epiphone bumper sticker, truss rod adjustment wrench and economy 10' cord.
In order to continually improve the design, quality and performance of our instruments and to make use of the best materials at all times, Gibson reserves the right to change specifications without notice. Additionally, because Gibson brand guitars are handcrafted, it is normal for wood grains, finishes and some measurements to vary from those listed on this Web site. As always, the prices listed are the Manufacturer’s Suggested Retail Price. Please contact an authorized Gibson dealer in your area for the most current pricing.