USA: 1-800-4GIBSON
Europe: 00+8004GIBSON1
GibsonProductsStoreNews-LifestyleLessonsCommunity24/7 Support
  • Gallery Horizontal
  • Gallery Horizontal Back
  • Gallery Top
  • Gallery Bottom
  • Gallery Headstock
  • Gallery Headstock Back
  • Gallery Side Shot
  • Gallery Medallion
  • COA
Body
Body Species Mahogany Body Wings
Body Type Firebird
Adhesive Franklin Titebond
Body
Neck
Species 9-ply Mahogany/Walnut Neck-Through w/Maple spline
Profile Period-correct Firebird
Truss Rod Historic Truss Rod Assembly (No Tubing)
Joint Angle 5° (+/- 15 seconds)
Adhesive Franklin Titebond
Neck
Neck Fit
Joint Neck-Through
Neck Fit
Fingerboard
Species Ebony
Radius 12"
Binding .062 White
Inlays Pearl Custom Blocks
Nut/E.O.B 1.687/2.062
Other Reissue Fret Wire/Black Side Dots
Fingerboard
Nut
Material Nylon
Width 1.687
Slots Gibson PLEK System
Nut
Headstock
Type Reverse Firebird
Truss Rod Cover Firebird
Angle 17 Degrees

Headstock
Tuners
Model Banjo-Style
Tuning Ratio 12:01
Plating Gold

Tuners
Bridge
Type ABR-1
Plating Gold
Bridge
Tailpiece
Type Maestro Vibrato
Plating Gold
Tailpiece
Hardware
Knobs Gold Top Hat with Gold Inserts and Dial Pointers
Pickguard White with Hot Stamped Red Firebird
Toggle Switch Washer Knurled Nut
Pickup Mounting Rings Gold
Control Plate Cover Black
Strings .010 - .046
Strap Buttons Brass Gibson End Pins
Hardware
Pickups
Neck Position Mini-Humbucker
(Ceramic)
Middle Position Mini-Humbucker
(Ceramic)
Bridge Position Mini-Humbucker
(Ceramic)
Pickups
Electronics
Potentiometers 2 Volume Controls
2 Tone Controls
Toggle Switch Switchcraft Axial Three-Way with Cream Toggle Cap
Output Jack Traditional ¼"
Electronics
Finish
Sealer Nitrocellulose Lacquer
Golden Mist Poly
Case
Type Firebird Hardshell
Interior Maroon Fur
Exterior Black Pleather
Accessories
Certificate of Authenticity Yes
Additional Materials Extra switch plate.
Additional Notes Each comes with a handmade, one-of-a-kind Custom Shop 20th Anniversary COA which is framed, a set of white gloves, a custom-fitted dust cover (that fits the guitar) with “retro” 1993 Custom Shop logo, and with a metal engraved “20th Anniversary” cover over the volume/tone backplate. An extra, black plastic backplate is included in the guitar case.
COA
In order to continually improve the design, quality and performance of our instruments and to make use of the best materials at all times, Gibson reserves the right to change specifications without notice. Additionally, because Gibson brand guitars are handcrafted, it is normal for wood grains, finishes and some measurements to vary from those listed on this Web site. As always, the prices listed are the Manufacturer’s Suggested Retail Price. Please contact an authorized Gibson dealer in your area for the most current pricing.