USA: 1-800-4GIBSON
Europe: 00+8004GIBSON1
GibsonProductsNews-LifestyleStoreLessonsCommunity24/7 Support
  • Shown in Aged
  • Shown in Aged
  • Shown in Aged
  • Shown in Aged
  • Shown in Aged
  • Shown in Aged
  • Shown in Aged
  • Shown in Aged
  • Certificate of Authenticity
  • Beano Cartoon Cover on Wooden Plaque
  • Vintage Replica Strap
  • Shown in VOS
  • Shown in VOS
  • Shown in VOS
  • Shown in VOS
  • Shown in VOS
  • Shown in VOS
  • Shown in VOS
  • Shown in VOS
Body
Top Maple
Back 1-Piece Solid Mahogany
Binding .090, Cream
Adhesive Franklin Titebond
Body
Neck
Species Mahogany
Profile Thin Clapton Profile
Truss Rod Traditional
Joint Angle 4° (+/- 15 seconds)
Adhesive Franklin Titebond
Neck
Neck Fit
Joint Mortise & Tenon
Adhesive Franklin Titebond
Joint Angle Tolerance +/- .005"
Neck Fit
Fingerboard
Species Rosewood
Frets 22 Medium Jumbo
Radius 12"
Binding Period-correct .04” Cream Binding
Inlays Aged Acrylic Trapezoids
Nut/E.O.B 1.687/2.062
Other Tortoise Side Dot Markers
Fingerboard
Nut
Material Nylon 6/6
Width 1.687
Slots Gibson PLEK System
Nut
Headstock
Type 60 Reissue
Logo Mother-of-Pearl Gibson Logo
Truss Rod Cover Gibson Bell Shaped™ Molded
Angle 17 Degrees

Headstock
Tuners
Model Grover Kidney Button Tuners
Tuning Ratio 14:01
Plating Nickel

Tuners
Bridge
Type Tune-O-Matic (ABR-1)
Material Zinc Surrounded by a Die Casting Alloy
Plating Nickel
Bridge
Tailpiece
Type Lightweight Aluminum Stop Bar
Plating Nickel
Bridge
Hardware
Knobs Gold Top-Hat Knobs (w/no inserts), Metal Pointer Rings
Toggle Switch Washer Historically accurate thin cream with gold screenprint
Pickguard Vintage-Cream Plastic
Strings .010 - .046, Vintage Strings
Strap Buttons Aluminum Strap Buttons
Hardware
Pickups
Neck Position Custom Bucker
Bridge Position Custom Bucker
Magnet Material Alnico III
Pickups
Electronics
Potentiometers 2 Volume Controls, 2 Tone Controls
Type 500k audio-taper .022mF “Bumble Bee” Tone Capacitors
Coil Wiring Parallel-Machine Wound
Toggle Switch Three-Way Switchcraft with Cream Toggle Cap
Output Jack 1/4" Switchcraft
Electronics
Finish
Color Antiquity Burst
Sealer Nitrocellulose Lacquer
Aged VOS
Case
Type Custom Shop Hardshell
Case Exterior Black Pleather-with Clapton’s signature silkscreened in gold
Case Interior Maroon Crushed Velvet
Case
Accessories
Certificate of Authenticity Eric Clapton Certificate of Authenticity
Collateral Aged and signed
Engraved wood plaque with the May 7, 1966 Beano comic cover, engraved leather Certificate of Authenticity, limited 180mg vinyl of John Mayall and the Bluesbreakers with Eric Clapton, and a vintage replica guitar strap.

Aged
22” x 17” May 7, 1966 Beano comic cover poster, engraved leather Certificate of Authenticity, limited 180mg vinyl of John Mayall and the Bluesbreakers with Eric Clapton, and a vintage replica guitar strap.

VOS
22” x 17” May 7, 1966 Beano comic cover poster, Certificate of Authenticity, John Mayall and the Bluesbreakers with Eric Clapton CD, and a vintage replica guitar strap.
Additional Materials Each Eric Clapton 1960 Les Paul comes with documentation for the guitar’s limited lifetime warranty.
In order to continually improve the design, quality and performance of our instruments and to make use of the best materials at all times, Gibson reserves the right to change specifications without notice. Additionally, because Gibson brand guitars are handcrafted, it is normal for wood grains, finishes and some measurements to vary from those listed on this Web site. As always, the prices listed are the Manufacturer’s Suggested Retail Price. Please contact an authorized Gibson dealer in your area for the most current pricing.