Best Combination of Features and Value in the SG Line.

Products Electric Guitars SG Gibson USA SG Special Faded Features

’50s Rounded Neck Profile

No guitar neck profiles are more distinguishable than the neck profiles employed on the Gibson models of today. The more traditional ’50s neck profile on the SG Special is the thicker, rounder profile, emulating the neck shapes found on the iconic 1958 and 1959 Les Paul Standards. The neck is machined in Gibson’s rough mill using wood shapers to make the initial cuts. But once the fingerboard gets glued on, the rest—including the final sanding—is done by hand. That means there are no two necks with the exact same dimensions. So while it still has the basic characteristics of its respective profile, each neck will be slightly different, with a distinct but traditional feel.

Dot Inlays

Over the years, the classic dot inlay has been one of the more traditional features of many Gibson models, including the SG. A figured, swirl acrylic gives these inlays that classic “pearl” look. They are inserted into the fingerboard using a process that eliminates gaps and doesn’t require the use of fillers.

Gibson’s 490 (R) Rhythm and (T) Treble Pickup

The mid to late 1960s saw the emergence of a very different type of music coming from the clubs of England. It was an interpretation of the blues that hadn’t been heard before, and it was much harder, more rocking, and definitely louder than anything else before it. As such, this new genre’s players were demanding more powerful amplifiers with increased volume outputs to satisfy their sonic explorations. This led to a call for a more versatile pickup that could split coils through a push/pull knob, and prevent microphonic feedback from occurring when the volumes were turned up to maximum levels. Gibson answered this call with the introduction of the revolutionary 490T and 490R pickups (“T” for treble, and “R” for rhythm). The 490R is a humbucker with the tonal characteristics of an original PAF, with a slight increase in upper mid-range response. The 490T bridge pickup is calibrated to match the 490R, with pole pieces aligned a little further apart to accommodate the spacing of the strings at the bridge, which is different than the spacing of the strings at the neck.

Solid Mahogany Body

Probably the most central of all the SG Special’s features is its solid mahogany body—lightweight, strong, with a thick, warm tone. The mahogany goes through the same rigorous selection process as all of Gibson’s woods, and is personally inspected and qualified by Gibson’s team of skilled wood experts before it enters the Gibson factories. Inside the Gibson factories, humidity is maintained at 45 percent, and the temperature at 70 degrees. This ensures all woods are dried to a level of “equilibrium,” where the moisture content does not change during the manufacturing process. This guarantees tight-fitting joints and no expansion, in addition to reducing the weight. It also helps with improving the woods’ machinability and finishing properties. Consistent moisture content means that a Gibson guitar will respond evenly to temperature and humidity changes long after it leaves the factory.

More Key Features

The Gibson Logo
Angled Headstock
The angled headstock is another example of Gibson’s industry-changing way of thinking. Every Gibson headstock is carved out of the same piece of mahogany as the neck then fitted with Gibson’s traditional wing blocks. It is not a “glued-on” headstock, and the process takes craftsmanship, time, and effort. But the rewards are worth the effort. The headstock is carefully angled at 17 degrees, which increases pressure on the strings and helps them stay in the nut slots. An increase in string pressure also means there is no loss of string vibration between the nut and the tuners, which equals better sustain.
Angled Headstock
Adjustable Truss Rod
The adjustable truss rod is a Gibson innovation that revolutionized the guitar. Before this ground-breaking discovery in the early 1920s, the truss rod was used only to strengthen and stabilize the neck. By making it adjustable, the truss rod now allows a guitar to be set up using a variety of string gauges, as well as string heights. This easily accommodates any style of playing, and allows a limitless range of set-up options. And by placing it at the base of the headstock, the adjustable nut is easily accessible, even while the strings are still on the guitar.
Adjustable Truss Rod
22-Fret Rosewood Fingerboard
Rosewood has always graced the fingerboards of the world’s finest stringed instruments, including many of today’s Gibsons. The fingerboard on the Gibson SG Special is constructed from the highest grade rosewood on the planet. The rosewood is personally inspected and qualified by Gibson’s team of skilled wood experts before it enters the Gibson factories to be fitted onto the necks of the SGs. The resilience of this dense and durable wood makes these fingerboards extremely balanced and stable, and gives each chord and note unparalleled clarity and bite. The 12-inch radius of the fingerboard provides smooth note bending capabilities and eliminates “dead” or “choked out” notes, common occurrences on fingerboards with lesser radiuses.
22-Fret Rosewood Fingerboard
Nickel and Silver Alloy Fret Wire
The fret wire on the Gibson models is a combination nickel and silver alloy (approximately 80 percent nickel and 20 percent silver) specifically designed for long life and superior wear. Gibson’s traditional “medium/jumbo” fret wire is first shaped by hand, then cut to an exact 12-inch radius. After hand pressing it into the fingerboard, a machine press finishes the job to eliminate the gap between the bottom of the fret wire and the fingerboard.
Nickel and Silver Alloy Fret Wire
Set-Neck Construction
Like all classic Gibson guitars, the necks on SG Specials are distinguished by one of the more traditional features that have always set them apart—a glued neck joint. Gluing the neck to the body of the guitar ensures a “wood-to-wood” contact, no air space in the neck cavity, and maximum contact between the neck and body, allowing the neck and body to function as a single unit. The result? Better tone, better sustain, and no loose or misaligned necks.
Set-Neck Construction
Tune-O-Matic Bridge
The Tune-o-matic bridge was the brainchild of legendary Gibson president Ted McCarty in 1954. At the time, it was a true revelation in intonation, and set a standard for simplicity and functionality that has never been bettered. This pioneering piece of hardware provides a firm seating for the strings, allowing the player to adjust and fine-tune the intonation and string height in a matter of minutes. It also yields a great union between the strings and body, which results in excellent tone and sustain. It is combined with a separate “stopbar” tailpiece, essentially a modified version of the earlier wraparound bridge. To this day, the Tune-o-matic remains the industry standard. It is the epitome of form and function in electric guitar bridge design, and is one of the most revered and copied pieces of guitar hardware ever developed.
Tune-O-Matic Bridge

Nitrocellulose Finish